Whether it is powders, solids or liquids, one must often measure the level of a product and control its ingress and egress.
From high tech guided radar to low tech, yet extremely effective, rotating paddle & float types, there are a variety of options to chose from.
Examples of technologies available are
Assembled locally, this Level Sensor is designed for use in liquid level applications
where a switch point is necessary for one or more levels. Consists of one or more
floats on a stem with reed switches inside the stem at pre-set points. These switch
points are customer configurable on ordering but cannot be moved once complete.
The Model T/LL130 series is designed for use in water, coolant or fuel/oil tanks and
provides a factory set variable resistive, voltage or PWM (Pulse Width Modulated)
output suitable for driving industry standard fuel gauges or connecting into PLCs.
The device has no moving parts and can be mounted at any angle above horizontal
as long as it covers the whole depth of the tank. The unit cannot be inverted.
Ideal for powders, solids and granular material
The R7 series of miniature rotating paddle sensors are designed for use with plastic
moulding or injection machines and extruders. They can also be designed into
equipment such as grain processing machines and granulating equipment. These
products are the most compact units of their type and are deigned to provide reliable
Mounting: ¾ BSP Thread c/w lock nut
Supply Power: 24 VAC & 230 VAC, 50/60 Hz
Contact Rating: SPDT, 3 A @ 250 VAC, 4 A @ 30 VDC (Resistive)
Low cost and simple to install
Easily adjustable range to 2000 mm
Direct mounting with 1½”and 2” BSP connections
For light fuel oils and inert liquids such as water
This universal, mechanical level gauge is fitted with a high quality brass mechanism.
The range is adjustable for tanks with heights or diameters.
Universal, pneumatic tank contents gauge featuring capsule type movement for
remote indication up to 50 m.
Fully adjustable for tanks between 900 and 3000 mm at a density of 0.84 g/cm3 (fuel
oil and diesel)
Single-pole Magnet System
The WEKA VLI operating principle is based on the use of a permanent bar magnet
The magnetic materials ensure optimal performance even at extreme temperatures.
Multi-functional: Three functions in one system!
Miniature liquid level switches are designed for reliable operation in small tanks andcontainers. Their rugged design and careful engineering make them perfect solutionsor OEM and large volume applications.
OLV-2A: Designed for water applications
OLV-2P: Use in chemicals, food and portable water
OLV-2F: Designed for applications involving corrosive chemicals and solvents
OLH-3 : Use in water only, horizontal mounting